 |
 |
 |
 |
 |
 |
 |
| Boundary Scan Test Accessory Hardware |
- Our Boundary Scan test hardware products, allow
Test Engineers to further proliferate the use of DFT
and Boundary Scan Techniques, through low cost,
flexible, IEEE standard hardware test options.
| Increase test coverage and make your design engineers test point insertion effort easier!!!!! And with the Scan Test Cable Adapters from JEK-Tech(tm), you can stop requesting signal pinouts that match your Boundary Scan tester, instead of your designers device programming system..... |
The AccessExtender(tm) increases test access and coverage!
| AccessExtender(TM) Products Support from 0.8v to 3.3v I/O test signals. |
JEK Technical Services, LLC
3 Delta Drive
Nashua, NH 03060-5823
Phone : 603-791-4233
FAX : 603-791-4606
Copyright ©2008 JEK Technical Services, LLC.
3 Delta Drive
Nashua, NH 03060-5823
Phone : 603-791-4233
FAX : 603-791-4606
Copyright ©2008 JEK Technical Services, LLC.
Still trying to access those connectors from a Bed of Nails?
Worried about the actual Connector Solder Joint?
Why worry about intermittent connections due to board flexure during
flying probe testing?
Worried about the actual Connector Solder Joint?
Why worry about intermittent connections due to board flexure during
flying probe testing?
| NEW! Our AccessExtender(tm)-400 Product! |